2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
Synonym(s):2-Trimethylsilylethylsulfonyl chloride;SES-Cl
- CAS NO.:106018-85-3
- Empirical Formula: C5H13ClO2SSi
- Molecular Weight: 200.76
- MDL number: MFCD09265153
- SAFETY DATA SHEET (SDS)
- Update Date: 2025-01-27 09:38:02
What is 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&?
Physical properties
bp 60 °C/0.1 mmHg; yellow oil.
The Uses of 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
β-Trimethylsilylethanesulfonyl Chloride is used in the protection of primary and secondary amines as their sulfonamides, which are cleaved by fluoride ion. It participates in the reations of Protection of Amines, SESCl in Synthesis, N-Alkylation, Deprotection Conditions, Formation of 2-Trimethylsilylethanesulfonylimines, the (N-SES-Imino) Phenyliodinane or SESN=IPh Reagent, SES-N3, etc.
The Uses of 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
2-(Trimethylsilyl)ethanesulfonyl Chloride can be prepared to used to treat cancer and other diseases.
Preparation
|?-Trimethylsilylethanesulfonyl Chloride can be most conveniently synthesized from commercially available vinyltrimethylsilane (eq 1). Radical addition of sodium bisulfite to the vinyl group catalyzed by t-butyl perbenzoate yields the sulfonate salt which can be directly converted to SESCl with phosphorus(V) chloride. The chloride can then be purified by distillation. The intermediate sulfonate salt is commercially available. The chloride can also be prepared in 62% yield from the salt using sulfuryl chloride and triphenylphosphine (eq 2). A less convenient procedure to synthesize SESCl using |?-trimethylsilylethylmagnesium chloride and sulfuryl chloride has also been developed (eq 3).

Purification Methods
Check IR; if the bands at ~3200 (OH) cm-1 are strong, then much of the SES-Cl had hydrolysed, and it should be treated with POCl3 (with cooling) and stirred at ~25o for about 1hour, poured into ice cold H2O, extracted with CH2Cl2, washed with NaHCO3, dried (Na2SO4), evaporated , and it distils as a yellow oil in a vacuum. This procedure is used for converting the Na salt to SES-Cl. It reacts with amines to form amides, e.g. SES-NRR’, which on heating with CsF (i.e. F-ions) in DMF at 95o provide the amine (NHRR’), SO2 and CH2=CH2 [Weinreb et al. Tetrahedron Lett 27 2099 1986]. [Ribiere et al. Chem Rev 106 2249 2006.]
Properties of 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
| Boiling point: | 146.8 °C/760 mmHg |
| Density | 1.059 g/mL at 25 °C |
| refractive index | n20/D 1.4444 |
| Flash point: | 21 °C |
| storage temp. | 2-8°C |
| solubility | Sol most common organic solvents. |
Safety information for 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
| Signal word | Danger |
| Pictogram(s) |
![]() Flame Flammables GHS02 ![]() Exclamation Mark Irritant GHS07 |
| GHS Hazard Statements |
H225:Flammable liquids H315:Skin corrosion/irritation H319:Serious eye damage/eye irritation H335:Specific target organ toxicity, single exposure;Respiratory tract irritation |
| Precautionary Statement Codes |
P210:Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P302+P352:IF ON SKIN: wash with plenty of soap and water. P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing. |
Computed Descriptors for 2-(TRIMETHYLSILYL)ETHANESULFONYL CHLORI&
New Products
Indole Methyl Resin tert-butyl 9-methoxy-3-azaspiro[5.5]undecane-3-carboxylate Boc-His(Boc)-OH 2-CTC Resin 4-Chloro-7-tosy1-7Hpyrrolo[2,3-d]pyrimidine 5,7-Dibromo-1H-indole 2,5-dichloro-N-hydroxy-4,6-dimethylpyridine-3-carboximidamide 2,2-Dimethoxy-7-azaspiro[3.5]nonane hydrochloride 4-chloromethyl-5-methyl-1,3-dioxol-2-one (DMDO-Cl) R-2-BENZYLOXY PROPIONIC ACID 1,1’-CARBONYLDIIMIDAZOLE 1,1’-CARBONYLDI (1,2-4 TRIAZOLE) N-METHYL INDAZOLE-3-CARBOXYLIC ACID 4-((2-hydroxyethyl)thio)benzoic acid 1-(TERT-BUTOXYCARBONYL)-2-PYRROLIDINONE Methyl 6-methylnicotinate 3-Pyridineacrylic acid tert-Butyl carbazate TETRAHYDRO-2H-PYRAN-3-OL 2-((4-morpholinophenylamino) (methylthio) methylene) malononitrile 3-(4-morpholinophenylamino)-5-amino-1H-pyrazole-4-carbonitrile 2,4-dihydroxybenzaldehyde 1,3-Diethyl-1,3-Diphenylurea Methyl 2-methylquinoline-6-carboxylateRelated products of tetrahydrofuran
You may like
-
2-(Trimethylsilyl)ethanesulfonyl chloride CAS 106018-85-3View Details
106018-85-3 -
Pyridine 99.5% HPLC /UV SpectroscopyView Details
110-86-1 -
Guanine , 99%View Details
73-40-5 -
Piperazine Spot supply, best priceView Details
110-85-0 -
Dibutyl PhthalateView Details
84-74-2 -
Imidazole Spot supply, competitive priceView Details
288-32-4 -
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate 98% (GC)View Details
2082-79-3 -
Thiourea 99% ARView Details
62-56-6



