Didecyldimethylammonium chloride SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： Didecyldimethylammonium chloride
- CAS： 7173-51-5
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Acute toxicity - Category 4, Oral
Skin corrosion, Sub-category 1B
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Danger
H302 Harmful if swallowed
H314 Causes severe skin burns and eye damage
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: Didecyldimethylammonium chloride
- Common names and synonyms: Didecyldimethylammonium chloride
- CAS number: 7173-51-5
- EC number: 230-525-2
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms/effects, acute and delayed
no data available
Indication of immediate medical attention and special treatment needed, if necessary
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Poisons A and B
SECTION 5: Firefighting measures
Suitable extinguishing media
Use dry chemical, carbon dioxide or alcohol-resistant foam.
Specific hazards arising from the chemical
no data available
Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Environmental precautions
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up
If a spill occurs, clean it up promptly. Don't wash it away. Instead, sprinkle the spill with sawdust, vermiculite, or kitty litter. Sweep it into a plastic garbage bag, and dispose of it as directed on the pesticide product label./Residential uses/
SECTION 7: Handling and storage
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Do not contaminate water, food or feed by storage or disposal. Bardac Wood Preservative 80
SECTION 8: Exposure controls/personal protection
Control parameters
no data available
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
Liquid
-
Colour：
Colorless crystals
-
Odour：
Mushroom-like odor
-
Melting point/freezing point：
94-100 deg C /OECD Guideline 102/
-
Boiling point or initial boiling point and boiling range：
>180 deg C; decomposes before boiling at 1 atm /OECD Guideline 103/
-
Flammability：
no data available
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
no data available
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
pH = 6.8 to 6.9 at 25 deg C in a 29.5% water solution
-
Kinematic viscosity：
no data available
-
Solubility：
In water, 0.65 g/L at 20 deg C /OECD Guideline 115/
-
Partition coefficient n-octanol/water：
log Kow = 2.59 at 20 deg C, pH 7
-
Vapour pressure：
<4.3X10-5 mm Hg at 25 deg C, <1.1X10-5 mm Hg at 20 deg C /OECD Guideline 104/
-
Density and/or relative density：
0.95 g/cm3 (20°C)
-
Relative vapour density：
no data available
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
no data available
Hazardous decomposition products
When heated to decomposition it emits very toxic fumes of /nitrogen oxides, ammonia, and hydrogen chloride/.
SECTION 11: Toxicological information
Acute toxicity
- Oral: LD50 Rat oral 84 mg/kg
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: LC50; Species: Lepomis macrochirus (Bluegill); Conditions: freshwater, static; Concentration: 270 ug/L for 96 hr (95% confidence interval: 190-390 ug/L)
- Toxicity to daphnia and other aquatic invertebrates: EC50; Species: Daphnia magna (Water flea) age <24 hr; Conditions: freshwater, static, 19 deg C, pH 8.2, hardness 209.43 mg/L CaCO3, dissolved oxygen >6.5 mg/L; Concentration: >1000 ug/L for < or =6 hr; Effect: behavioral changes, general /Bardac 22, 45% AI
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
AEROBIC: Didecyl dimethyl ammonium chloride biodegradation test results(1).Test Category Degradation Duration (days) OECD Guideline 301D (Ready Biodegradability: Closed Bottle Test) readily biodegradable 69% 28 OECD Guideline 301B (Ready Biodegradability: CO2 Evolution Test) readily biodegradable 67-72% CO2 evolution 28 Zahns-Wellens test (activated sludge, non-adapted) inherently biodegradable 80% DOC removal 28; >15 day adaptation time observed with rapid degradation afterwards OECD Guideline 303A (Simulation Test - Aerobic Sewage Treatment. A: Activated Sludge Units) >99.95% 59 Soil degradation study using a loam soil 49% mineralization 114
Bioaccumulative potential
A BCF of 81 was reported in bluegill sunfish (Lepomis macrochirus) for didecyl dimethyl ammonium chloride(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate. Didecyl dimethyl ammonium chloride is reported to have low bioconcentration in tests using carp (Cyprinus carpio)(3); BCF values not reported(SRC).
Mobility in soil
The log Koc for didecyl dimethyl ammonium chloride has been reported as 5.64 (sand), 5.96 (sandy loam), 6.20 (silty clay loam), 6.17 (silt loam)(1), corresponding to Koc values of 4.4X10+5, 9.1X10+5, 1.6X10+6, and 1.5X10+6 respectively(SRC). In batch equilibrium studies using five different soil types and OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method), didecyl dimethyl ammonium chloride had Koc values of 667, 1140, 10456, 14072 and 24433(2). According to a classification scheme(2), these Koc values suggest that didecyl dimethyl ammonium chloride is expected to have low to no mobility in soil with most Koc values suggesting the compound is immobile in soil. Didecyl dimethyl ammounium chloride is a cationic surfactant(1) that may exist in cation form in the environment(SRC), and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Didecyl dimethyl ammounium chloride binds rapidly to suspended solids and sediments(1). Reported Kd values at 25 deg C are 3.03 (sand), 3.91 (sandy loam), 4.52 (silty clay loam), and 4.49 (silt loam)(1).
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Transport hazard class(es)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Packing group, if applicable
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/