Dibromodifluoromethane SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： Dibromodifluoromethane
- CAS： 75-61-6
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Hazardous to the ozone layer, Category 1
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Warning
H420 Harms public health and the environment by destroying ozone in the upper atmosphere
none
none
none
P502 Refer to manufacturer or supplier for information on recovery or recycling
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: Dibromodifluoromethane
- Common names and synonyms: Dibromodifluoromethane
- CAS number: 75-61-6
- EC number: 200-885-5
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention. See Notes.
Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms/effects, acute and delayed
Excerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]: Inhalation of material may be harmful. Contact may cause burns to skin and eyes. Inhalation of Asbestos dust may have a damaging effect on the lungs. Fire may produce irritating, corrosive and/or toxic gases. Some liquids produce vapors that may cause dizziness or suffocation. Runoff from fire control may cause pollution. (ERG, 2016)
Indication of immediate medical attention and special treatment needed, if necessary
Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations as needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Minimize physical activity and provide a quiet atmosphere. Monitor for pulmonary edema and treat if necessary ... Anticipate seizures and treat if necessary ... For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... Do not use emetics. Rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... Treat frostbite with rapid rewarming techniques ... Chlorinated Fluorocarbons (CFCs) and related compounds
SECTION 5: Firefighting measures
Suitable extinguishing media
Excerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]: SMALL FIRE: Dry chemical, CO2, water spray or regular foam. LARGE FIRE: Water spray, fog or regular foam. Do not scatter spilled material with high-pressure water streams. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal. FIRE INVOLVING TANKS: Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)
Specific hazards arising from the chemical
Excerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]: Some may burn but none ignite readily. Containers may explode when heated. Some may be transported hot. For UN3508, be aware of possible short circuiting as this product is transported in a charged state. (ERG, 2016)
Special protective actions for fire-fighters
In case of fire in the surroundings, use appropriate extinguishing media.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Ventilation. Do NOT let this chemical enter the environment.
Environmental precautions
Ventilation. Do NOT let this chemical enter the environment.
Methods and materials for containment and cleaning up
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
SECTION 7: Handling and storage
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
See Chemical Dangers.IN GENERAL, MATERIALS WHICH ARE TOXIC AS STORED OR WHICH CAN DECOMP INTO TOXIC COMPONENTS ... SHOULD BE STORED IN A COOL, WELL-VENTILATED PLACE, OUT OF DIRECT RAYS OF THE SUN, AWAY FROM AREAS OF HIGH FIRE HAZARD, & SHOULD BE PERIODICALLY INSPECTED ... INCOMPATIBLE MATERIALS SHOULD BE ISOLATED FROM EACH OTHER.
SECTION 8: Exposure controls/personal protection
Control parameters
TLV: 100 ppm as TWA
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear safety spectacles.
Protective gloves.
Use ventilation, local exhaust or breathing protection.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
Dibromodifluoromethane is a colorless, nonflammable liquid. It may cause illness from ingestion and may be irritating to skin. If exposed to high temperatures it may emit toxic fumes. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. Since it is a liquid it can easily penetrate the soil and contaminate groundwater and nearby streams. It is used as a fire extinguishing agent.
-
Colour：
Colorless heavy liq
-
Odour：
Characteristic odor
-
Melting point/freezing point：
-141°C
-
Boiling point or initial boiling point and boiling range：
24.5°C
-
Flammability：
Noncombustible LiquidNonflammable Gas
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
None
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
no data available
-
Solubility：
Insoluble (NIOSH, 2016)
-
Partition coefficient n-octanol/water：
1.99
-
Vapour pressure：
620 mm Hg (NIOSH, 2016)
-
Density and/or relative density：
2.297
-
Relative vapour density：
7.2 (AIR= 1)
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
Decomposes on contact with hot surfaces or flames. This produces toxic and corrosive gases including hydrogen bromide and hydrogen fluoride. Reacts with alkali metals, powdered aluminium, magnesium and zinc.
Chemical stability
no data available
Possibility of hazardous reactions
NONFLAMMABLE.The gas is heavier than air and may accumulate in lowered spaces causing a deficiency of oxygen.DIBROMODIFLUOROMETHANE is incompatible with the following: Chemically-active metals such as sodium, potassium, calcium, powdered aluminum, zinc & magnesium (NIOSH, 2016).
Conditions to avoid
no data available
Incompatible materials
Chemically active metals such as sodium, potassium, calcium, powdered aluminum, zinc, magnesium
Hazardous decomposition products
When heated to decomposition, it emits very toxic fumes of hydrogen bromide and hydrogen fluoride.
SECTION 11: Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is irritating to the respiratory tract. Inhalation of high levels may cause lung oedema. See Notes. The substance may cause effects on the central nervous system. Exposure could cause lowering of consciousness.
STOT-repeated exposure
no data available
Aspiration hazard
A harmful concentration of this gas in the air will be reached very quickly on loss of containment.
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
Based upon the highly halogenated structure of dibromodifluoromethane, biodegradation is expected to be slow(1).
Bioaccumulative potential
An estimated BCF of 6.9 was calculated for dibromodifluoromethane(SRC), using an estimated log Kow of 2.0(1,SRC) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low.
Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc for dibromodifluoromethane can be estimated to be about 49(SRC). According to a classification scheme(2), this estimated Koc value suggests that dibromodifluoromethane is expected to have very high mobility in soil.
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: UN1941 (For reference only, please check.)
IMDG: UN1941 (For reference only, please check.)
IATA: UN1941 (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: DIBROMODIFLUOROMETHANE (For reference only, please check.)
IMDG: DIBROMODIFLUOROMETHANE (For reference only, please check.)
IATA: DIBROMODIFLUOROMETHANE (For reference only, please check.)
Transport hazard class(es)
ADR/RID: 9 (For reference only, please check.)
IMDG: 9 (For reference only, please check.)
IATA: 9 (For reference only, please check.)
Packing group, if applicable
ADR/RID: III (For reference only, please check.)
IMDG: III (For reference only, please check.)
IATA: III (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Check oxygen content before entering area.The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort.Rest and medical observation is therefore essential.Chlorofluorocarbons are known to cause effect on the cardiovascular system.