α-bromotoluene SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： α-bromotoluene
- CAS： 100-39-0
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Warning
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: α-bromotoluene
- Common names and synonyms: α-bromotoluene
- CAS number: 100-39-0
- EC number: 202-847-3
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Fresh air, rest. Refer for medical attention.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .
Most important symptoms/effects, acute and delayed
Inhalation causes irritation of nose and throat; severe exposure may cause pulmonary edema. Vapors cause severe eye irritation; liquid can burn eyes. Skin contact causes irritation. Ingestion causes irritation of mouth and stomach. (USCG, 1999)
Indication of immediate medical attention and special treatment needed, if necessary
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Aromatic hydrocarbons and related compounds
SECTION 5: Firefighting measures
Suitable extinguishing media
Water spray, dry chemical, foam or carbon dioxide is effective. Water is effective not only for dispersing of leaked chemicals prior to its ignition, but also for cooling fire-exposed containers.
Specific hazards arising from the chemical
Special Hazards of Combustion Products: Irritating hydrogen bromide gas may be formed. Behavior in Fire: Forms vapor that is a powerful tear gas. (USCG, 1999)
Special protective actions for fire-fighters
Use water spray, powder, foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Personal protection: chemical protection suit including self-contained breathing apparatus.
Environmental precautions
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Personal protection: chemical protection suit including self-contained breathing apparatus.
Methods and materials for containment and cleaning up
Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Ventilate area of spill or leak. ... If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters.
SECTION 7: Handling and storage
Precautions for safe handling
NO open flames. Above 79°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from strong oxidants, strong bases and food and feedstuffs. Dry. Well closed.In general, materials which are toxic as stored or which can decomposition into toxic components due to heat, moisture, acids, or acid fumes, should be stored in cool, well ventilated place, out of sun, away from area of high fire hazard and should be periodically inspected and monitored. Incompatible materials should be isolated.
SECTION 8: Exposure controls/personal protection
Control parameters
no data available
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear face shield or eye protection in combination with breathing protection.
Protective gloves. Protective clothing.
Use ventilation, local exhaust or breathing protection.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
BENZYL BROMIDE is a colorless liquid with an agreeable odor. Toxic by inhalation and by skin absorption. It is slightly soluble in water and denser than water (density 1.44 g / cm3 (Aldrich)). A lachrymator. Corrosive to metals and tissue.
-
Colour：
Clear, refractive liquid
-
Odour：
Very sharp; pungent; like tear gas
-
Melting point/freezing point：
-4 °C
-
Boiling point or initial boiling point and boiling range：
198 ~ 199 °C
-
Flammability：
Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
79 °C
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
no data available
-
Solubility：
Insoluble in water
-
Partition coefficient n-octanol/water：
log Kow = 2.92
-
Vapour pressure：
0.506mmHg at 25°C
-
Density and/or relative density：
1.438 (22 °C)
-
Relative vapour density：
5.8 (vs air)
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
On combustion, forms toxic fumes including hydrogen bromide. Decomposes slowly on contact with water. This produces hydrogen bromide. Reacts violently with bases, magnesium and strong oxidants. Attacks many metals in the presence of moisture.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
Combustible. Gives off irritating or toxic fumes (or gases) in a fire.BENZYL BROMIDE reacts with water, alcohols, common metals (except nickel and lead), bases, amines and oxidizing agents. (NTP, 1992). This material stored over activated 4A molecular sieve burst a bottle due to condensation-polymerization reaction with generation of HBr gas, [Chem. Eng. News, 1979, 57(12), 74].
Conditions to avoid
no data available
Incompatible materials
Decomposes rapidly in presence of all common metals except nickel and lead, liberating heat and hydrogen bromide.
Hazardous decomposition products
The substance decomposes slowly on contact with water producing hydrogen bromide.
SECTION 11: Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
Lachrymation. The substance is severely irritating to the eyes, skin, respiratory tract and gastrointestinal tract.
STOT-repeated exposure
no data available
Aspiration hazard
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
no data available
Bioaccumulative potential
An estimated BCF of 39 was calculated in fish for benzyl bromide(SRC), using a log Kow of 2.92(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC). However, bioconcentration is expected to be attenuated by hydrolysis(SRC), with a calucalted chemical hydrolysis half-life of 79 minutes(4).
Mobility in soil
The Koc of benzyl bromide is estimated as 340(SRC), using a log Kow of 2.92(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that benzyl bromide is expected to have moderate mobility in soil. However, adsorption on moist soil is expected to be attenuated by hydrolysis(SRC), with a calucalted chemical hydrolysis half-life of 79 minutes(4).
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: UN1737 (For reference only, please check.)
IMDG: UN1737 (For reference only, please check.)
IATA: UN1737 (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: BENZYL BROMIDE (For reference only, please check.)
IMDG: BENZYL BROMIDE (For reference only, please check.)
IATA: BENZYL BROMIDE (For reference only, please check.)
Transport hazard class(es)
ADR/RID: 6.1 (For reference only, please check.)
IMDG: 6.1 (For reference only, please check.)
IATA: 6.1 (For reference only, please check.)
Packing group, if applicable
ADR/RID: II (For reference only, please check.)
IMDG: II (For reference only, please check.)
IATA: II (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
A similar substance, benzyl chloride (ICSC 0016), is a carcinogen but insufficient data are available on the long term effects of benzyl bromide.