Allyl propyl disulphide SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： Allyl propyl disulphide
- CAS： 2179-59-1
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Warning
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: Allyl propyl disulphide
- Common names and synonyms: Allyl propyl disulphide
- CAS number: 2179-59-1
- EC number: 218-550-7
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Fresh air, rest.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms/effects, acute and delayed
Exposure Routes: inhalation, ingestion, skin and/or eye contact Symptoms: Irritation eyes, nose, respiratory system; lacrimation (discharge of tears) Target Organs: Eyes, respiratory system (NIOSH, 2016)
Indication of immediate medical attention and special treatment needed, if necessary
The substance can be absorbed into the body by inhalation and by ingestion.
SECTION 5: Firefighting measures
Suitable extinguishing media
To fight fire use foam, carbon dioxide, or dry chemical.
Specific hazards arising from the chemical
This chemical is combustible. (NTP, 1992)
Special protective actions for fire-fighters
Use foam, dry powder, carbon dioxide.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Environmental precautions
Personal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Methods and materials for containment and cleaning up
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place. Chemical protection suit including self-contained breathing apparatus.
SECTION 7: Handling and storage
Precautions for safe handling
NO open flames. Above 56°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from oxidants.Separated from oxidants.
SECTION 8: Exposure controls/personal protection
Control parameters
TLV: 0.5 ppm as TWA; (SEN).MAK: 12 mg/m3, 2 ppm; peak limitation category: I(1)
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear safety goggles or eye protection in combination with breathing protection.
Protective gloves.
Use ventilation, local exhaust or breathing protection.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
PHYSICAL DESCRIPTION: Clear pale yellow liquid with a pungent odor. (NTP, 1992)
-
Colour：
Liquid
-
Odour：
Pungent, irritating odor
-
Melting point/freezing point：
209°C(lit.)
-
Boiling point or initial boiling point and boiling range：
69°C/16mmHg(lit.)
-
Flammability：
Combustible Liquid
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
56°C(lit.)
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
no data available
-
Solubility：
less than 1 mg/mL at 68° F (NTP, 1992)
-
Partition coefficient n-octanol/water：
log Kow = 3.70 (est)
-
Vapour pressure：
1.35mmHg at 25°C
-
Density and/or relative density：
0.984g/cm3
-
Relative vapour density：
(air = 1): 5.1
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
Decomposes on burning. This produces sulfur oxides. Reacts with oxidants.
Chemical stability
no data available
Possibility of hazardous reactions
Combustible.ALLYL PROPYL DISULFIDE may react vigorously with strong oxidizing agents. Incompatible with acids, diazo and azo compounds, halocarbons, isocyanates, aldehydes, alkali metals, nitrides, hydrides and other strong reducing agents. Reactions with these materials generate heat and in many cases hydrogen gas. May liberate hydrogen sulfide upon decomposition or reaction with an acid.
Conditions to avoid
no data available
Incompatible materials
Can react with oxidizing materials
Hazardous decomposition products
When heated to decomposition it emits highly toxic /sulfur oxides/.
SECTION 11: Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is irritating to the eyes, skin and respiratory tract.
STOT-repeated exposure
no data available
Aspiration hazard
A harmful contamination of the air can be reached rather quickly on evaporation of this substance at 20°C.
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
no data available
Bioaccumulative potential
An estimated BCF of 140 was calculated for allyl propyl disulfide(SRC), using an estimated log Kow of 3.70 (1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC).
Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc of allyl propyl disulfide can be estimated to be 500(SRC). According to a classification scheme(2), this estimated Koc value suggests that allyl propyl disulfide is expected to have moderate mobility in soil.
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: UN1993 (For reference only, please check.)
IMDG: UN1993 (For reference only, please check.)
IATA: UN1993 (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: FLAMMABLE LIQUID, N.O.S. (For reference only, please check.)
IMDG: FLAMMABLE LIQUID, N.O.S. (For reference only, please check.)
IATA: FLAMMABLE LIQUID, N.O.S. (For reference only, please check.)
Transport hazard class(es)
ADR/RID: 3 (For reference only, please check.)
IMDG: 3 (For reference only, please check.)
IATA: 3 (For reference only, please check.)
Packing group, if applicable
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/