1,1,1,2-tetrachloro-2,2-difluoroethane SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： 1,1,1,2-tetrachloro-2,2-difluoroethane
- CAS： 76-11-9
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Warning
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: 1,1,1,2-tetrachloro-2,2-difluoroethane
- Common names and synonyms: 1,1,1,2-tetrachloro-2,2-difluoroethane
- CAS number: 76-11-9
- EC number: 200-934-0
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention. See Notes.
Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth.
Most important symptoms/effects, acute and delayed
Exposure Routes: inhalation, ingestion, skin and/or eye contact Symptoms: Irritation eyes, skin; central nervous system depression; pulmonary edema; drowsiness; dyspnea (breathing difficulty) Target Organs: Eyes, skin, respiratory system, central nervous system (NIOSH, 2016)
Indication of immediate medical attention and special treatment needed, if necessary
Victims of freon inhalation require management for hypoxic, CNS anesthetic, & cardiac symptoms. Patients must be removed from the exposure environment, & high flow supplemental oxygen should be utilized. The respiratory system should be evaluated for injury, aspiration, or pulmonary edema & treated appropriately. CNS findings should be treated supportively. A calm environment with no physical exertion is imperative to avoid increasing endogenous adrenegic levels. Exogenous adrenergic drugs must not be used to avoid inducing sensitized myocardial dysrhythmias. Atropine is ineffective in treating bradyarrhythmias. For ventricular dysrhythmias, diphenylhydantoin & countershock may be effective. Cryogenic dermal injuries should be treated by water bath rewarming at 40-42 deg C until vasodilatory flush has returned. Elevation of the limb & standard frostbite management with late surgical debridement should be utilized. Ocular exposure requires irrigation & slit lamp evaluation for injury. Freons
SECTION 5: Firefighting measures
Suitable extinguishing media
In case of fire in the surroundings, use appropriate extinguishing media.
Specific hazards arising from the chemical
Excerpt from ERG Guide 126 [Gases - Compressed or Liquefied (Including Refrigerant Gases)]: Some may burn but none ignite readily. Containers may explode when heated. Ruptured cylinders may rocket. (ERG, 2016)
Special protective actions for fire-fighters
In case of fire in the surroundings, use appropriate extinguishing media.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment.
Environmental precautions
Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment.
Methods and materials for containment and cleaning up
Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do not let this chemical enter the environment.
SECTION 7: Handling and storage
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
See Chemical Dangers. Well closed.Well closed.
SECTION 8: Exposure controls/personal protection
Control parameters
TLV: 100 ppm as TWA.MAK: 1700 mg/m3, 200 ppm; peak limitation category: II(2); pregnancy risk group: D
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear safety spectacles.
Protective gloves.
Use ventilation, local exhaust or breathing protection.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
1,1,1,2-tetrachloro-2,2-difluoroethane is a colorless solid with a slight, ether-like odor. mp: 40.6°C; bp: 91.5°C.
-
Colour：
Colorless liquid or solid
-
Odour：
Slight ether odor
-
Melting point/freezing point：
39-44°C
-
Boiling point or initial boiling point and boiling range：
93.3°C at 760 mmHg
-
Flammability：
Noncombustible Solid
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
11.8°C
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
2.1583X10-3 Pa.s at 313.75 K
-
Solubility：
0.01 % (NIOSH, 2016)
-
Partition coefficient n-octanol/water：
log Kow = 3.41 (est)
-
Vapour pressure：
40 mm Hg (NIOSH, 2016)
-
Density and/or relative density：
1.726 g/cm3
-
Relative vapour density：
7.0 (Air = 1)
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
Decomposes on contact with hot surfaces or flames. This produces toxic fumes including hydrogen chloride, hydrogen fluoride and phosgene. Reacts with alkali metals, powdered aluminium, magnesium and zinc. Attacks plastics, rubber and coatings.
Chemical stability
no data available
Possibility of hazardous reactions
1,1,1,2-tetrachloro-2,2-Difluoroethane is non-flammable. Incompatible with active metals such as potassium, sodium, beryllium, powdered aluminum, zinc, magnesium, and calcium. Reacts with acids.
Conditions to avoid
no data available
Incompatible materials
Chemically-active metals such as potassium, beryllium, powdered aluminum, zinc, magnesium, calcium and sodium; acids.
Hazardous decomposition products
Decomposes on contact with hot surfaces or flames. This produces toxic fumes including hydrogen chloride, hydrogen fluoride and phosgene.
SECTION 11: Toxicological information
Acute toxicity
- Oral: LD50 Rat oral >8 g/kg
- Inhalation: LC50 Mice inhalation 15,000 ppm/2 hr
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
Inhalation of high levels may cause lung oedema. See Notes. The substance may cause effects on the cardiovascular system and central nervous system. This may result in cardiac disorders and central nervous system depression. Exposure could cause lowering of consciousness.
STOT-repeated exposure
no data available
Aspiration hazard
A harmful contamination of the air will be reached rather slowly on evaporation of this substance at 20°C; on spraying or dispersing, however, much faster.
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
ANAEROBIC: Structurally similar compounds such as Freon 12 and Freon 114 have been shown to biodegrade under anaerobic conditions(1), suggesting that 1,1,1,2-tetrachloro-2,2-difluoroethane may also biodegrade under anaerobic conditions(SRC).
Bioaccumulative potential
An estimated BCF of 82 was calculated in fish for 1,1,1,2-tetrachloro-2,2,-difluoroethane(SRC), using an estimated log Kow of 3.41(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC), provided the compound is not metabolized by the organism(SRC).
Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc for 1,1,1,2-tetrachloro-2,2,-difluoroethane can be estimated to be 200(SRC). According to a classification scheme(2), this estimated Koc value suggests that 1,1,1,2-tetrachloro-2,2,-difluoroethane is expected to have moderate mobility in soil.
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: no data available
IMDG: no data available
IATA: no data available
UN Proper Shipping Name
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Transport hazard class(es)
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Packing group, if applicable
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Do NOT use in the vicinity of a fire or a hot surface, or during welding.The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort.Rest and medical observation is therefore essential.