UV-VIS LIGHT CURABLE RESIN

The Uses of UV-VIS LIGHT CURABLE RESIN

• Cures rapidly to form a glassy high modulus, optically clear material.
• Excellent for use in protective coatings, optical and outdoor applications.
• Non yellowing.
• Low oxygen inhibition.
• Mechanical Properties after curing:

Modulus*: 1300 MPa
Strength*: 40 MPa
Elongation*: 6%
Pencil Hardenss: 6H
Tack Free**: 80+

*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width.
** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material data using ASTM D 638-02a.

The Uses of UV-VIS LIGHT CURABLE RESIN

UV curable very low viscosity resin:

• Cures rapidly to form a glassy, high modulus material.
• Excellent for use in applications requiring low viscosity, high hardness, and low shrinkage stress.
• Good for some spray coatings requiring no volatile organic compounds (VOCS).
• Non-yellowing.
• Low oxygen inhibition.
• Mechanical properties after curing:

Modulus*: 750 MPa
Strength*: 20 MPa
Elongation*: 11%
Pencil Hardness: 6H
Tack free**: 35

*Test resources: Tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width.
** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material Data using ASTM D 638-02a.

The Uses of UV-VIS LIGHT CURABLE RESIN

• Cures extremely rapidly to form a glassy, high modulus material.
• Excellent for use in optical applications.
• High refractive index - 1.54.
• High impact absorption.
• Non-yellowing.
• No oxygen inhibition.
• Mechanical Properties after curing:

Modulus*: 208 MPa
Strength*: 7 MPa
Elongation*: 54%
Pencil Hardness: 6H
Tack Free**: 3 min

*Test resources: Tensile tester, 35mm gauge length, 1.0 mm thickness, 6.5 mm width.
** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material Data using ASTM D 638-02a.

General Description

Storage:

• The storage temperature should not exceed 35°C.
• Keep tightly closed. Store in a cool, dry, well ventilated area.
• Do not expose to ultraviolet light.
• High temperatures (>80°C), pressure and contamination with peroxides may result in auto-polymerization of the product.
• Unstable upon depletion of inhibitor.